King 2.5 Emulsion Coilover 18 Inch Travel

King 2.5 Emulsion Coilover 18 Inch Travel
Processing...

Code: PR2518-CONR

$455.80

Internal Bypass Upgrade:
Viton Seal Upgrade:
Cylinder Finish:
Component Color:
Reservoir Finish:
Bump:
Rod End:
Triple Rate Springs:
Coil Slider:
Aluminum Spring Guide Cover:

Qty


Product Features

•••••

Length

  • Extended: 46 Inches
  • Collapsed: 28 Inches

Cylinders

  • Precision Bored Shock Cylinders to within +/- .001 for proper sealing and optimum valving

Clamping

  • Pinch Bolt Design Offers Superior Clamping Force to Retain Pre-load Adjustments without Crushing the Threads

Piston

  • Heat Treated 6061 Aluminum Alloy Piston

Springs

  • Shock does not come with springs. Springs must be purchased separately

Shaft

  • Large 3/4" or 7/8" Diameter Shafts with a Minimum 100,000 lb./in. Tensile Strength

Bearing

  • Steel, Teflon Lined, Spherical Bearing for Smooth Articulation & Long Life

Product Description

•••••
King 2.5 Emulsion Coilover 18 Inch Travel offers a high performance coilover without a reservoir. King emulsion coilovers are best suited for lower speed applications that will not generate as much heat. The King emulsion coilovers do not have the external reservoir which is used to help radiate and dissipate heat generated from the rigors of high speed off roading. Like all King shocks, King emulsion coil overs are built to order for each specific application. You can rest assured that your King coil overs are the finest shocks available and will give you everything you need to get the most of your suspension. Since all King Shocks are made to order, the aluminum shock components are available in custom colors to match your vehicle. King Blue comes standard and is included in the price of all King shocks. The viton seals are ideal for vehicles that will racing or will be doing some high speed driving through the desert. The viton seals withstand temperatures up to 450 degrees to ensure proper sealing at even the hottest temperatures. The optional viton seals are the same as the ones offered on King's pure race series shocks. If your vehicle requires special mounting bolts and adjustments, King offers several spherical bearing reducers / spacers, available to fit 1/2 & 5/8 bolt sizes and 1 1/4 & 1 1/2 mounting tab widths, some metric sizes are available. King shocks are available with pop-off rebound Valving. This makes your shock a compression damper only and there will not be any rebound dampering. Available on all Performance Race and Pure Race Series shocks. King shocks are available with a rubber or expanded urethane foam bump on the rod end to help soften the blow if your shocks bottom out. All King shocks are available with the standard billet or welded loop rod ends at no extra cost. King coil overs come standard with a blue coil slider. You do have the option of a black coil slider or a billet nylon coil slider. The billet nylon coil slider is capable of withstanding temperatures up to 450 degrees and is ideal for high speed racing applications. All King Coil Overs come standard with a flat spring plate. You can upgrade to a raise spring plate for applications where you have coil clearance issues and want to make sure that the spring is not going to interfere with the other parts on your vehicle.