King 2.5 Pure Race Coilover Remote Reservoir 14 Inch Travel

King 2.5 Pure Race Coilover Remote Reservoir 14 Inch Travel
Processing...

Code: RS2514-COHR

$729.75

Cylinder Finish:
Component Color:
Reservoir Finish:
Reservoir Hose:
Reservoir Fitting:
End Cap Fitting:
Rubber Bump & Plate:
Rod End:

Qty


Product Features

•••••

Product Description

•••••

Extended Length: 38.56"
Collapsed Length: 24.56"


King 2.5" Pure Race remote reservoir coilovers offer the legendary racing performance you expect from the top of the King off road racing shocks. King 2.5" Pure Race reservoir coil-overs are 100% custom made for your application and are specially designed for the rigors of off road racing. The big difference between the Pure Race series coilovers and the performance race coilovers is the higher temperature, precision components, and increased adjustability. The Pure Race series use unique materials and design techniques with withstand temperatures up to 450 degrees which are usually reached from hours of continuous racing. You can rest assured that your King 2.5" Pure Race remote reservoir coil overs are the highest performing coil over shocks available on the market.

2.5" King Pure Race Remote Reservoir Coilovers have the Following Features:
  • 29.81" Extended/19.81" Collapsed Length
  • THIS COILOVER DOES NOT COME WITH SPRINGS.
  • Precision Bored Shock Cylinders to within +/- .001 for proper sealing and optimum valving
  • Machined with King's Proprietary, Truncated Design for Ultimate Strength & Easy Adjustability
  • Lightweight, Hard Anodized 6063 Aluminum ALloy Reservoirs to Dissipate Heat
  • O-Ring Schrader Cover Mounts to the Cap, not the Valve to Create a Postive Seal and Keep Dirt Out
  • Pinch Bolt Design Offers Superior Clamping Force to Retain Pre-load Adjustments without Crushing the Threads
  • Heat Treated 2024 Aluminum Alloy Piston with Highly Developed Port Configurations
  • Aluminum Components Machined from Aircraft Quality Billet
  • Heat Treated Stainless Alloy Valve Shims Which Remain Stable at High Temperatures
  • Wear Bands made from Exclusive Teflon Bronze Composite for Longest Wear Life Possible
  • Viton Rod Seals Withstand Temperatures up to 450 Degrees.
  • Large Diameter, 58-62 Rockwell Hardness Shafts with a Minimum 100,000 lb./in. Tensile Strength
  • Steel, Teflon Lined, Spherical Bearing for Smooth Articulation & Long Life
  • Urethane Seals Which have been Tested on 18 Wheelers for 450,000 Miles


Since all King air shocks are made to order, there are numerous customizations that we offer. Among them are the following:
  • Chrome or Custom Colored Shock Cylinder
  • Polished or Anodized Reservoir and Components
  • 45 & 90 Degree Hose Fittings and Piggyback Mounting
  • Longer Reservoir Hose
  • Black or Stainless Reservoir Hose
  • Viton Seals
  • Compression Adjusters
  • Spherical Bearing Reducers/Spacers
  • Pop-off Rebound Valving
  • Custom Cylinder & Shaft Lengths
  • Rubber or Foam Bump
  • Longer or Welded Loop Rod Ends
  • Triple Rate Spring Assemblies
  • Raise Spring Plates
  • Black King Logos
  • Springs sold separately