King 3.5 Inch Pure Race Series Bypass Piggyback Reservoir Shock 5 Tube 18 Inch Travel

King 3.5 Inch Pure Race Series Bypass Piggyback Reservoir Shock 5 Tube 18 Inch Travel
Processing...

Code: RS3518-BP5P

$1,784.95

Component Color:
Cylinder Finish:
Reservoir Finish:
Rubber Bump & Plate:
Rod End:

Qty


Product Features

•••••

Product Description

•••••

Extended Length: 48.06"
Collapsed Length: 30.06"


King 3.5" Pure Race Bypass shocks are built to the highest standard with only performance and racing in mind. King's 3.5" Pure Race series bypass shocks are built with the finest materials and craftsmanship available in order to ensure that your shocks will perform under extreme temperatures and conditions brought on from off road racing. The bypass tubes are made from 4130 Chromoly material and are CNC drilled before they are de-burred and polished by hand. The tubes are then tig welded to their exact location before finally tested at 300 psi. The location of the bypass tubes are determined using specifics for your exact vehicle and for each side, left and right. The bypass valves are made of high-temp 17-4 stainless steel alloy. The adjusters offer an unrivaled level of adjustability and precision. King Pure Race Bypass shocks are the finest shocks available on the market and have been proven time and time again to perform in the harshest conditions.
3.5" King Pure Race Bypass Shocks have the Following Features:
  • 48.06" Extended/30.06" Collapsed Length
  • 5 Bypass Tubes - 3 Compression, 2 Rebound
  • Precision Bored Shock Cylinders to within +/- .001 for proper sealing and optimum valving
  • Machined with King's Proprietary, Truncated Design for Ultimate Strength & Easy Adjustability
  • Lightweight, Hard Anodized 6063 Aluminum Alloy Reservoirs to Dissipate Heat
  • O-Ring Schrader Cover Mounts to the Cap, not the Valve to Create a Postive Seal and Keep Dirt Out
  • Heat Treated 2024 Aluminum Alloy Piston with Highly Developed Port Configurations
  • Aluminum Components Machined from Aircraft Quality Billet
  • Heat Treated Stainless Alloy Valve Shims Which Remain Stable at High Temperatures
  • Wear Bands made from Exclusive Teflon Bronze Composite for Longest Wear Life Possible
  • Viton Rod Seals Withstand Temperatures up to 450 Degrees.
  • Large Diameter, 58-62 Rockwell Hardness Shafts with a Minimum 100,000 lb./in. Tensile Strength
  • Steel, Teflon Lined, Spherical Bearing for Smooth Articulation & Long Life
  • Urethane Seals Which have been Tested on 18 Wheelers for 450,000 Miles


Since all King air shocks are made to order, there are numerous customizations that we offer. Among them are the following:
  • Chrome or Custom Colored Shock Cylinder
  • Polished or Anodized Reservoir and Components
  • 45 & 90 Degree Hose Fittings and Piggyback Mounting
  • Longer Reservoir Hose
  • Black or Stainless Reservoir Hose
  • Viton Seals
  • Compression Adjusters
  • Spherical Bearing Reducers/Spacers
  • Pop-off Rebound Valving
  • Custom Cylinder & Shaft Lengths
  • Rubber or Foam Bump
  • Longer or Welded Loop Rod Ends
  • Triple Rate Spring Assemblies
  • Raise Spring Plates
  • Black King Logos